PARAGON KILN E10 OVEN 8.5 X 8.75 X 6"

The digital Xpress-E-10A fires to 2000°F- ideal for enameling, china painting, glass art and jewelry. The digital Sentry Xpress controller includes temperature hold, making this kiln suitable for silver clay. The 3-key digital controller is in the base. The front control panel is tilted for easy operation of the digital controller. Because this model no longer has the side-mounted switch box, it saves tabletop space.

Unlatch and open the door with one hand; the latch operates so smoothly that delicate copper enameling or silver clay pieces remain undisturbed while opening or closing the door.

The door opens smoothly on a heavy-duty 1/2” hinge shaft. The firebricks store heat for quick temperature recovery after removing a copper enameling piece.

The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.

Features of the Sentry Xpress 3-key Controller on the Paragon Xpress-E-10

Design programs with up to 8 segments (steps) in Ramp-Hold mode.
Fire to a single temperature at a single speed in the simplified Single Segment mode.
Ramp-Hold mode can store 4 programs.
Skip Segment feature in Ramp-Hold mode
Temperature hold
The Sentry Xpress can control both heating and cooling.
Program Review lets you check that the program you are about to fire is correct.
Temperature Display throughout firing and cooling in your choice of °F or °C
Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
12 Month Warranty
LED Lights show whether you are in program, review, or firing mode.
The heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace. It needs no element pins. Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.

The Xpress-E-10 can now ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.

E-10 Furniture Kit

1 C-7 (7” square x 5/8”) Shelf

4 – 1/2” long 1” wide Square Posts

1 lb. Bag Kiln Wash

Optional View Window

Watch the bright red kiln interior through the optional 2” x 2” high-temperature glass window. (Note: The kiln may not reach its maximum temperature and may fire a little slower when equipped with the window.) The glass window is guaranteed up to 2300°F.

The window is especially useful for glass fusing and copper enameling. Conveniently watch your glass treasures progress through every stage from tack fuse to full fuse.

Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

SPECIFICATIONS
GSS Part Number:

10211J1BTA
Max Temp:

2000° F
1093° C
Voltage:

120
Phase:

1
Hertz:

50/60
Watts:

1800
Cordset:

NEMA 5-15P
Controller:

Sentry Xpress 3-Key Controller
Zone:

1
Thermocouple:

K-Type
Lid Door Switch:

NO
TUV:

YES
CE:

YES
Kiln Type:

Front Load
Door Type:

Swing with Latch
Sides:

4
Chamber Dimensions:

Internal Area (Square Inches):

459 sq in
Watts per Square Inch:

Refractory Insulation Type:

Insulating FireBrick (IFB)
Wall Thickness (Inches):

2.5″
Top Thickness (Inches):

2.5″
Bottom Thickness (Inches):

2.5″
Door Thickness (Inches):

Volume:

0.39 cu ft
11.04 l
Width Diameter:

8.5″
216mm
Depth:

8.75″
222mm
Height:

9″
229mm
Outer Size:

8.5″W x 8.75″H x 9″D
216mm x 222mm H x229mm D
Ship Size:

28″W x 24″H x 21″D
711mm W x 610mm H x 533mm D
Doorway Clearance:

20″
508mm
Ship Method:

UPS / FedEx